The meter speaker does not sound.
CHECK COMBINATION METER INPUT SIGNAL
Select the “Data Monitor” for the “Combination meter” and check the “BUZZER” monitor value.
| “BUZZER” | |
| Under the condition of speaker input | : On |
| Other than the above | : Off |
Is the inspection result normal?
YES>>GO TO 2.
NO>>Replace BCM. Refer to Removal and Installation.
CHECK METER SPEAKER CIRCUIT
Check meter speaker circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace combination meter. Refer to Removal and Installation.
NO>>Repair or replace malfunctioning parts.
Inspection and Adjustment
SYSTEM INITIALIZATION
Perform additional service for operating the power window control system normally after installing front door glass. Refer to Work Procedure.
FITTING INSPECTION
Check that glass is fitted securely into the sash groove.
Lower glass slightly [approximately 10 to 20 mm (0.39 to 0. ...
Diagnosis Procedure
A malfunction of brake pedal feel (height or others) is detected when the brake pedal is depressed.
CHECK AXLE
Check that there is no significant looseness of axle.
Front axle
2WD models: Refer to Inspection.
4WD models: Refer to Inspection.
Rear axle: Refer to Inspection.
Is the inspection result ...
Exploded View
Front height sensor :Vehicle front :N·m (kg-m, ft-lb) :N·m (kg-m, in-lb) ...