Nissan Armada 2025-2026 Service and Repair Manual: Engine Lubrication System — Service Data and Specifications (sds)
Inspection
INSPECTION AFTER INSTALLATION
Check the engine oil level. Refer to Inspection.
Start the engine, and check there is no leakage of engine oil.
Stop the engine and wait for 10 minutes.
Check the engine ...
Other materials:
Work Procedure
Description
Calibration must be performed after replacing or removing/installing the following parts..
Head Up Display unit
Windshield glass
Steering member
Diagnosis Procedure
NOTE:
Place the vehicle on level ground.
Keep the space when calibration. (Vehicle front area)
Wide: 2.0 m (6.56 ft)
Heigh ...
Configration (intelligent Key Unit)
Vehicle specification needs to be written with CONSULT because it is not written after replacing the Intelligent Key unit.
The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specific ...
Diagnosis Procedure
NOTE:
CHECK REFRIGERANT CYCLE PRESSURE
Connect recovery/recycling recharging equipment to the vehicle and perform pressure inspection with gauge. Refer to Symptom Table.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace parts depending on the inspection results.
CH ...
0.005