NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Excessive Operation Frequency

Nissan Armada 2025-2026 Service and Repair Manual / Brakes / Brake Control System. With Vdc / Excessive Operation Frequency

Description

VDC function, TCS function, ABS function, EBD function, brake limited slip differential (BLSD) function, brake assist function, hill start assist function, advanced hill descent control function (4WD models) and trailer sway control function operates in excessive operation frequency.

Diagnosis Procedure

CHECK BRAKING FORCE

Check brake force using a brake tester.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Check the brake system.

CHECK FRONT AXLE AND REAR AXLE

  1. Disconnect 12V battery negative terminal.

  2. Check that there is no excessive looseness in front and rear axle.

    • Front axle

      • 2WD models: Refer to Inspection.

      • 4WD models: Refer to Inspection.

    • Rear axle: Refer to Inspection.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace error-detected parts.

CHECK WHEEL SENSOR

Check the wheel sensor.

  • Check installation and damage of wheel sensor.

  • Check connection of wheel sensor harness connector.

  • Check terminal of wheel sensor harness connector.

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Repair or replace the wheel sensor.

  • Front wheel sensor: Refer to Removal and Installation.

  • Rear wheel sensor: Refer to Removal and Installation.

CHECK SENSOR ROTOR

Check that there is no looseness, damage or foreign material on sensor rotor.

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

Repair or replace the sensor rotor.

  • Front sensor rotor

    • 2WD models: Refer to Removal and Installation.

    • 4WD models: Refer to Removal and Installation.

  • Rear sensor rotor: Refer to Removal and Installation.

CHECK WARNING LAMP TURN OFF

  1. Connect 12V battery negative terminal.

  2. Check that VDC warning lamp and ABS warning lamp turn OFF several seconds after ignition switch is ON.

  3. Check that VDC warning lamp and ABS warning lamp turn OFF after engine started or driving.

CAUTION:

Brake warning lamp turns ON when brake fluid is less than the specified level (brake fluid level switch is ON).

Is the inspection result normal?

YES>>

Normal

NO>>

Perform self-diagnosis for “ABS” with CONSULT.

    Other materials

    Hands On Detection
    Basic information In the Nissan Armada, the Hands On Detection system is an essential safety feature integrated within Steering Assist and ProPILOT Assist technologies. This system continuously monitors the driver’s interaction with the steering wheel through built-in sensors, ensuring that ...

    Rear Door
    Exploded View Rear door panel Grommet Rear door striker TORX bolt Rear door protector Rear door check link Rear door hinge (lower) Rear door hinge (upper) Rear door weather-strip Rear door parting seal lower 2 Rear door parting seal lower 1 Rear door parting sea ...

    Tail Lamp
    Exploded View Back door panel Tail lamp LH Grommet Tail lamp RH         : Clip : N·m (kg-m, in-lb) Removal and Installation CAUTION: Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric ...