Description
A malfunction of brake pedal feel (height or others) is detected when brake pedal is depressed.
Diagnosis Procedure
CHECK FRONT AXLE AND REAR AXLE
-
Disconnect 12V battery negative terminal.
-
Check that there is no excessive looseness in front and rear axle.
-
Front axle
-
2WD models: Refer to Inspection.
-
4WD models: Refer to Inspection.
-
-
Rear axle: Refer to Inspection.
-
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace error-detected parts.
CHECK DISC ROTOR
Check the disc rotor.
-
Front: Refer to Inspection and Adjustment.
-
Rear: Refer to Inspection and Adjustment.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Refinish or replace the disc rotor.
CHECK BRAKE FLUID LEAKAGE
Check the fluid leakage.
-
Front: Refer to Inspection.
-
Rear: Refer to Inspection.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace error-detected parts.
CHECK BRAKE PEDAL
Check the brake pedal.
- Brake pedal height: Refer to Inspection and Adjustment.
- Brake pedal assembly: Refer to Inspection.
Is the inspection result normal?
YES>>GO TO 5.
NO>>Adjust the brake pedal height or replace brake pedal assembly.
- Adjust the brake pedal: Refer to Inspection and Adjustment.
- Replace the brake pedal: Refer to Removal and Installation.
CHECK BRAKING FORCE
Check the brake force using a brake tester.
Is the inspection result normal?
YES>>GO TO 6.
NO>>Check each components of brake system.
CHECK BRAKE PERFORMANCE
-
Disconnect the ABS actuator and electric unit (control unit) connector so that ABS does not operate.
-
Check that brake force is normal in this condition. Connect harness connectors after checking.
Is the inspection result normal?
YES>>Normal
NO>>Check each components of brake system.
Other materials
Body Exterior Paint Color
Body Exterior Paint Color
FOR PRO-4X GRADE Component Color code BDAR BK23 BKAD BKH3
Description Grayish Green Silver Gray Black
Paint type note 2PM 2M 2M 2S
Anti scratch advanced paint × × × ×
Door mirror cover
Black
BKH3
BKH3
BKH3
BKH3
Door mirror finisher ...
License Plate Lamp
Exploded View
Back door panel
License plate lamp
: Pawl
Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal. ...
The Fuel Gauge Indicator Does Not Operate
Diagnosis Procedure
Fuel gauge will not indicate from a certain position.CONDUCTING THE COMBINATION METER SELF-DIAGNOSIS MODE
Perform the self-diagnosis mode of combination meter, and then check that the fuel gauge operates normally. Refer to On Board Diagnosis Function.
Is the inspection result no ...