
![]() | Transfer assembly | ![]() | Input oil seal | ||
![]() | : Vehicle front | ||||
![]() | : Always replace after every disassembly. | ||||
![]() | : Apply transfer fluid. | ||||
Input Oil Seal
Removal and InstallationWork Procedure
REPLACE INTELLIGENT KEY UNIT
Replace Intelligent Key unit. Refer to Removal and Installation.
>>
GO TO 2.
WRITING Vehicle SPECIFICATION
CONSULT Configuration
Perform configuration. Refer to Description.
>>
GO TO 3.
REGISTER INTELLIGENT KEYS
CAUTION:
If perform Intelligent Key registr ...
Refilling
WARNING:
The ignition switch OFF.
Recommended fluid and capacity: Refer to Fluids and Lubricants.
CAUTION:
Carefully fill the fluid. (Fill up for approximately 3 minutes.)
Leave the vehicle for 3 minutes, and check the fluid level again.
Install filler plug on transfer and tighten to the specif ...
Inspection
DRIVE PLATE DEFLECTION
Appearance of Drive Plate
Check the drive plate and signal plate for defamation or damage.
CAUTION:
Do not disassemble drive plate.
Do not place drive plate with signal plate facing down.
When handling signal plate, take care not to damage or scratch it.
Handle signal pla ...