WARNING:
REMOVAL
Remove transfer assembly from vehicle. Refer to Removal and Installation.
Remove input oil seal.
CAUTION:
Never damage the front case and input shaft.
INSTALLATION
Note the following, and install in the reverse order of removal.
| L | : 1.5 – 2.5 mm (0.059 – 0.098 in) |

CAUTION:
Never reuse input oil seal.
Apply transfer fluid onto circumference of oil seal.
When installing, never incline input oil seal.
Never handle the oil seal inner periphery and oil seal lip.
Exploded ViewRemoval and Installation
CAUTION:
Never damage the body panel.
REMOVAL
Remove seat.Remove front seat assembly (LH and RH). Refer to Removal and Installation. Remove second seat assembly (LH and RH).
Captain seat: Refer to Removal and Installation.
Bench seat: Refer to Removal and Installation.
Remove rear floor carpet. Re ...
ENGINE COOLANT : Draining
WARNING:
WARNING:
To avoid being scalded, never change engine coolant when the engine is hot.
Wrap a thick cloth around reservoir tank cap and carefully remove reservoir tank cap.
First, turn reservoir tank cap a quarter of a turn to release built up pressure. Then turn reservoir tank cap all the wa ...
NISSAN All-Mode 4WD system
The NISSAN All-Mode 4WD system in the Nissan Armada is engineered to deliver
maximum versatility and control by offering multiple selectable drive modes, including
AUTO, 4H, and 4L (if equipped). This intelligent system allows the driver to adapt
the Nissan Armada to a wide range of road and o ...