Removal and Installation
REMOVAL
Fully open hood assembly.
Disengage fender cover fixing pawls.
-
LH side


: Pawl : vehicle front -
RH side


: Pawl : vehicle front
Disengage fender cover fixing pawl, and then remove fender cover.
-
LH side


: Pawl : vehicle front -
RH side


: Pawl : vehicle front
CAUTION:
After removing fender cover, cover the end of windshield with urethane, etc. to prevent damage to windshield.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Install so that there is no clearance between windshield and cowl top cover.
Other materials
Diagnosis and Repair Work Flow
Work Flow
OVERALL SEQUENCEDETAILED FLOWGET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurs).
Check operation condition of the function that is malfunctioning.
>>
GO TO 2.
CHECK ...
Seat Cushion Blower Motor
Removal and Installation
REMOVALRemove front seat cushion trim and pad. Refer to Disassembly and Assembly.
Disengage fixing pawls and then remove front seat cushion blower motor.
: Pawl
Disengage front seat cushion blower motor harness fixing clip.
Disconnect front seat cushion blower motor con ...
Additional Service When Replacing 8ch Can Gateway
Description
When replacing the 8CH gateway, perform "Procedure before replacing" and "Procedure after replacing". Refer to Work Procedure.CAUTION:
Never reuse the parts which has been dropped
Dispose 8CH CAN gateway which is paired with Intelligent Key unit as it cannot reuse to other vehicle.
...