Recommended Fluid and Lubricants
The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedures described elsewhere in this manual.
| Fluid type | Capacity (approximate) | Recommended Fluids/Lubricants | ||||
|---|---|---|---|---|---|---|
Metric Measure | US Measure | Imperial Measure | ||||
Engine oil Drain and refill | With oil filter change | 6.0![]() | 6-3/8 qt | 5-2/8 qt |
| |
| Without oil filter change | 5.6 ![]() | 5-7/8 qt | 4-7/8 qt | |||
| Dry engine (engine overhaul) | 7.2 ![]() | 7-5/8 qt | 6-3/8 qt | |||
| Engine coolant | With reservoir tank | 13.0 ![]() | 13-6/8 qt | 11-4/8 qt |
| |
| Reservoir tank | 1.61 ![]() | 1-6/8 qt | 1-3/8 qt | |||
| Automatic transmission fluid | 10.0 *1 | 10-5/8 qt*1 | 8-6/8 qt*1 |
| ||
| Brake fluid | — | — | — |
| ||
| Transfer fluid | 1.8 ![]() | 1-7/8 qt | 1-5/8 qt |
| ||
| Differential gear oil | Front | 0.85 ![]() | 7/8 qt | 6/8 qt |
| |
| Rear | R240 | 2.0 ![]() | 2-1/8 qt | 1-6/8 qt |
| |
| R240 (DL) | 1.9 ![]() | 2 qt | 1-5/8 qt | |||
| Multi-purpose grease | — | — | — |
| ||
*1: The fluid capacity is the reference value.
SAE Viscosity NumberWiring Diagram
BATTERY POWER SUPPLY FUSE No. 27
Click link to Wiring Diagram.
BATTERY POWER SUPPLY FUSE No. 30
Click link to Wiring Diagram.
BATTERY POWER SUPPLY FUSE No. 55
Click link to Wiring Diagram.
BATTERY POWER SUPPLY FUSE No. 58
Click link to Wiring Diagram.
BATTERY POWER SUPPLY FUSE No. 133
Click link to ...
High Intensity Cabin Structure
In recent years, the body construction of vehicles is changing for the purpose of protecting passengers at the time of the collision.
A greater use of high strength sheet steel reinforcements and the adoption of sheet steels of different thicknesses are good examples of securing survival space for p ...
PRECAUTIONS FOR POP UP ENGINE HOOD : Precautions
WARNING:
Always observe the following items for preventing accidental activation.
Before removal or installation of the pop-up engine hood and harness, always OFF the ignition switch, disconnect the battery negative terminal, and wait for 3 minutes or more. (To discharge the accumulated electricity ...