Removal and Installation
REMOVAL
Fully close front door glass.
Remove front door woofer. Refer to Removal & Installation.
Remove front door check link mounting bolt of vehicle body side.
Remove front door check link mounting bolts of front door panel, and then take front door check link out from the hole of front door panel.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, check the open/close operation. Refer to Inspection.
Other materials
Vin Registration
Description
VIN Registration is an operation to registering VIN in ECM. It must be performed each time ECM is replaced.NOTE:
Accurate VIN which is registered in ECM may be required for Inspection & Maintenance (I/M). (For details, refer to Work Procedure .)
Work Procedure
CHECK VIN
Check the VIN ...
Tilt & Telescopic
Diagnosis Procedure
CHECK STEERING COLUMN CONTROL MODULE POWER SUPPLY AND GROUND CIRCUIT
Check steering column control module power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
...
Key Reminder Function Does Not Operate
Diagnosis Procedure
CHECK DOOR SWITCH
Check door switch.
Refer to Component Function Check.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK UNLOCK SENSOR
Check unlock sensor.
Refer to Diagnosis Procedure.
Is the inspection result n ...