Diagnosis Procedure
CHECK STEERING COLUMN CONTROL MODULE POWER SUPPLY AND GROUND CIRCUIT
Check steering column control module power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK TILT & TELESCOPIC SWITCH GROUND CIRCUIT
Check tilt & telescopic switch ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
REPLACE STEERING COLUMN CONTROL MODULE
-
Replace steering column control module. Refer to Removal and Installation.
-
Confirm the operation again.
Does it operate normally?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Other materials
Timing Chain
Exploded View
Timing chain (bank 1)
Timing chain slack guide (bank 1)
Timing chain tension guide (bank 1)
Timing chain tensioner (bank 1)
Timing chain tensioner (bank 2)
Timing chain slack guide (bank 2)
Timing chain tension guide (bank 2)
Timing chain (bank 2)
Crankshaft s ...
Vin Registration
Description
VIN Registration is an operation to registering VIN in ECM. It must be performed each time ECM is replaced.NOTE:
Accurate VIN which is registered in ECM may be required for Inspection & Maintenance (I/M). (For details, refer to Work Procedure .)
Work Procedure
CHECK VIN
Check the VIN ...
Zero Point Reset
Description
Zero point reset is an initializing procedure for occupant detection system that must be performed when replacing occupant detection system control unit or removing and installing passenger seat.If zero point reset is not performed, the initialization is incomplete and occupant detection ...