NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Front Fillet Molding

Nissan Armada 2025-2026 Service and Repair Manual / Body Exterior, Doors, Roof & Vehicle Security / Exterior / Fillet Molding / Front Fillet Molding

Removal and Installation

REMOVAL

Remove front fillet molding fixing screws .

Apply protective tape (A) on the part to protect it from damage.

Disengage front fillet molding fixing pawl indicated by arrows as shown in the figure.

: Pawl

Disengage fixing clips, and then remove front fillet molding indicated by arrows as shown in the figure.

: Clip

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:

  • Always replace double-sided tape with a new one, if front fillet molding is reused.

  • Remove double-sided tape remaining on front fender panel and back of front fillet molding with a double-sided tape remover, after removing front fillet molding.

  • Degrease front fillet molding mounting surface of front fender panel.

  • Paint grain or dust on mounting surface of front fillet molding may spoil exterior appearance if it remains. Clean the mounting surface and check that no paint grain or dust remains, before starting the operation.

  • When installing front fillet molding, visually check the clips, then replace it with new parts if they are damaged.

  • When installing front fillet molding, check that clips are securely fitted in fender panel holes, and then press it in.

  • Never wash the vehicle within 24 hours after installing so as to keep adhesive.

    Other materials

    System maintenance (ProPILOT Assist 2.1)
    For reliable and accurate operation of the Nissan Armada ProPILOT Assist 2.1 system, it is crucial to keep the driver monitoring area clean and free from any obstruction at all times. Regularly inspect the camera surface and gently remove dust, fingerprints, or any debris using a soft, cl ...

    Roof Tools and Preparation
    Special Service Tools The actual shapes of TechMate tools may differ from those of special service tools illustrated here. Tool number (TechMate No.) Tool name Description (NI-39570) Chassis ear Locates the noise (NI-50397) NISSAN Squeak and Rattle Kit Repairs the cause of noise C ...

    Sonar Sensor (front)
    Exploded View CITY MODELS Front bumper fascia Corner sensor front LH holder Corner sensor front LH Center sensor front LH holder Center sensor front LH Center sensor front RH holder Center sensor front RH Corner sensor front RH Corner sensor front RH holder vehicle fro ...