Removal and Installation
REMOVAL
Apply protective tape (A) on the part to protect it from damage.
Insert a remover tool (A) between rear fillet molding front and rear door panel, cut double-sided tape using a cutter (B) while lifting rear fillet molding front.
Disengage fixing clips, and then remove rear fillet molding front indicated by arrows as shown in the figure.
 |
: Clip |
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
Always replace double-sided tape with a new one, if rear fillet molding front is reused.
-
Remove double-sided tape remaining on rear door panel and back of rear fillet molding front with a double-sided tape remover, after removing rear fillet molding front.
-
Degrease rear fillet molding front door panel mounting surface of rear door panel.
-
Paint grain or dust on mounting surface of rear fillet molding front may spoil exterior appearance if it remains. Clean the mounting surface and check that no paint grain or dust remains, before starting the operation.
-
When installing rear fillet molding front, visually check the clips, then replace it with new parts if they are damaged.
-
When installing rear fillet molding front, check that clips are securely fitted in rear door panel holes, and then press it in.
-
Never wash the vehicle within 24 hours after installing so as to keep adhesive.
Other materials
Fuel-filler door
Basic information
CAUTION
Avoid directing high-pressure water, such as from a pressure washer,
onto or around the Nissan Armada fuel-filler door area.
Always ensure the fuel-filler door is securely closed before using an
automatic or high-pressure car wash.
Opening the fuel-filler do ...
Basic information
The air suspension system in the Nissan Armada automatically adjusts the vehicle
height based on driving conditions and driver-selected preferences, providing enhanced
comfort, performance, and versatility.
The standard ride height of the Nissan Armada is set to "NORMAL", but the syst ...
Back Door Stay
Removal and Installation
CAUTION:
Perform work with 2 workers, because it is heavy weight.
Support back door with a proper material and use protective tape or shop cloth to protect back door and body from falling and damage when removing and installing back door stay.
REMOVALSupport back door a ...