Exploded View
CITY MODEL
 |
Front bumper fascia |  |
U nut |  |
Front fog lamp bracket |
 |
Front fog lamp | ||||
| : vehicle front | |||||
 |
: N·m (kg-m, in-lb) | ||||
OFF ROAD MODEL
|
Front bumper fascia | |
Front fog lamp | ||
| : vehicle front | |||||
|
: N·m (kg-m, in-lb) | ||||
Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
REMOVAL
Remove front bumper fascia. Refer to following.
-
City model: Removal and Installation.
-
Off road model: Removal and Installation.
Disconnect front fog lamp harness connector.
Remove front fog lamp mounting bolts, and then remove front fog lamp.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, perform aiming adjustment. Refer to Adjustment.
Replacement
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
FRONT FOG LAMP
CAUTION:
Replacement of a single part is not possible due to the adoption of LED. For replacement, replace front fog lamp as a set. Refer to Removal and Installation.
Other materials
Air Breather Hose
Exploded View
Bracket
A/T assembly
Air breather hose
Clip
: N·m (kg-m, ft-lb)
Always replace after every disassembly.
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go dow ...
Diagnosis and Repair Work Flow
Work Flow
OVERALL SEQUENCEDETAILED FLOWGET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurs).
Check operation condition of the function that is malfunctioning.
>>
GO TO 2.
CHECK ...
Normal Operating Condition
Description
SHIPPING MODE
Shipping mode inhibits battery power consumption during transportation or storage of the vehicle. Vehicle is set to shipping mode before being shipped from the factory.
When ignition switch is OFF, BCM operates shipping mode.
For shipping mode cancel operation, refer t ...