Exploded View
For exploded view of side turn signal lamp, refer to Exploded View.
Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
REMOVAL
Remove door mirror finisher. Refer to Disassembly and Assembly.
Remove side camera (if equipped). Refer to Removal and Installation.
Disconnect side turn signal lamp harness connector 
.
Remove side turn signal lamp fixing pawls , and then remove side turn signal lamp.
INSTALLATION
Install in the reverse order of removal.
Replacement
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
SIDE TURN SIGNAL LAMP
CAUTION:
Replacement of a single part is not possible due to the adoption of LED. For replacement, replace side turn signal lamp as a set. Refer to Removal and Installation.
Other materials
Connecting Rod Bearings
Connecting Rod Bearing
DESCRIPTION Selection points Selection parts Selection items Selection methods
Between cylinder block and crankshaft
Main bearing
Main bearing grade
(bearing thickness)
Determined by match of cylinder block bearing housing grade (inner diameter of housing) and crank ...
Precautions
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...
Rear Wiper Blade
Removal and Installation
REMOVALOperate rear wiper to the service position. Refer to System Description.
Lift up rear wiper arm, and then lock back rear wiper arm.
Remove rear wiper blade from rear wiper arm while rotating rear wiper blade in the direction indicated by the arrows as shown in the f ...