NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Front Oil Seal

Nissan Armada 2025-2026 Service and Repair Manual / Transmission & Driveline / Driveline. Transfer: Atx93b / Front Oil Seal

Exploded View

Front output shaft Front oil seal Front case
Snap ring Sprockets with chain Snap ring
Rear case        
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
: Apply transfer fluid.
: Apply Genuine Liquid Gasket, Loctite 598 or equivalent.

Removal and Installation

WARNING:

  • Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.

REMOVAL

Drain transfer fluid. Refer to Draining.

Remove transfer assembly from vehicle. Refer to Removal and Installation.

Remove the rear case mounting bolts .

* : Tighten together with the bracket.

Remove the rear case .

Remove the rear output shaft snap ring .

Remove the sprockets with chain from front case .

Remove the front output shaft snap ring .

Remove the front output shaft from front case .

CAUTION:

Never damage the output shaft.

Remove the front oil seal form front case .

CAUTION:

Never damage the front case.

INSTALLATION

Install front oil seal with a drift (A) (commercial service tool) within the dimension (L) shown as follows.

L : 1.7 – 2.3 mm (0.067 – 0.091 in)

CAUTION:

  • Never reuse front oil seal.

  • Apply transfer fluid onto circumference of oil seal.

  • When installing, never incline front oil seal.

  • Never handle the oil seal inner periphery and oil seal lip.

Install  the front output shaft to front case .

CAUTION:

Never damage the front oil seal lip.

Install the front output shaft snap ring .

Install the sprockets with chain to front case .

Install the rear output shaft snap ring .

Apply sealant to mating surface of rear case.

  • For applying sealant, refer to Exploded View.

Install the rear case .

Tightening the rear case mounting bolts to the specified torque. Refer to Exploded View.

* : Tightening the bolt with bracket.

Install transfer assembly. Refer to Removal and Installation.

Fill with new transfer fluid. Refer to Refilling.

Inspection

INSPECTION AFTER INSTALLATION

Check fluid leakage and the fluid level. Refer to Inspection.

ADJUSTMENT AFTER INSTALLATION

When transfer case component parts are removed, performe writing unit parameter. Refer to Description.

    Other materials

    Outside mirrors
    Basic information WARNING Objects reflected in the passenger-side outside mirror of the Nissan Armada may appear farther away than they actually are. Always exercise caution when changing lanes to the right. Relying solely on the mirror can lead to misjudgment and potential accidents. For ma ...

    Rear Propeller Shaft
    Exploded View REMOVAL Propeller shaft assembly         : vehicle front : N·m (kg-m, ft-lb) : Always replace after every disassembly. DISASSEMBLY Snap ring Journal bearing Journal Flange yoke Propeller shaft tube     : vehicle front : Always r ...

    Cumulative Battery Discharge Current Clear
    Description CUMULATIVE BATTERY DISCHARGE CURRENT CLEAR is an operation to clear the cumulative value of battery discharge current which is memorized in IPDM E/R. This operation is necessary after replaced the 12V battery. Refer to Work Procedure.NOTE: The cumulative battery discharge current value i ...