Removal and Installation
REMOVAL
Remove cowl top cover. Refer to Removal and Installation.
Remove front wiper drive assembly mounting bolts
.

Disconnect front wiper drive assembly harness connector and remove harness clip, and then remove front wiper drive assembly.
CAUTION:
Never drop front wiper motor or cause it to come into contact with other parts.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
When installing, temporarily tighten all mounting bolts, and then tighten bolts to specified torque. Refer to Exploded View.
-
When front wiper drive assembly is replaced, before installing front wiper arm, operate front wipers to set front wiper motor to the auto stop position, and then install front wiper arms.
Disassembly and Assembly
DISASSEMBLY
Remove front wiper drive assembly. Refer to Removal and Installation.
Remove front wiper linkage from front wiper motor assembly and front wiper pivot assembly.
ASSEMBLY
Note the following item, and then assemble in the reverse order of disassembly.
CAUTION:
Before assembly, apply body grease to joint parts of front wiper linkage, front wiper pivot assembly, and front wiper motor assembly. For the grease point, refer to Exploded View.
Other materials
Sunshade Slider
Exploded View
Refer to Exploded View.
Removal and Installation
REMOVALRemove sunshade. Refer to Removal and Installation.
Remove sunshade slider.
INSTALLATIONNote the following item, and then install in the reverse order of removal. CAUTION:
Set sunshade slider RH and sunshade slider LH in the same ...
Configuration (combination Meter)
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the combination meter.The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle ...
Front Camera (driving Video Recorder)
Exploded View
Front camera (driving video recorder)
Bracket
Cover
Removal and Installation
REMOVALUsing a suitable tool, release clips , and remove cover .
Disconnect front camera (driving video recorder) harness connector.
Push to the arrow the stopper , and remove the front camera ( ...