NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Fuse Inspection

Nissan Armada 2025-2026 Service and Repair Manual / Electrical & Power Control / Power Supply, Ground & Circuit Elements / Power Supply, Ground Circuit Elements / Fuse Inspection

How To Check

  • If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse.

  • Use fuse of specified rating. Never use fuse of more than specified rating.

  • Do not partially install fuse; always insert it into fuse holder properly.

  • Remove fuse for “ELECTRICAL PARTS (BAT)” if vehicle is not used for a long period of time.

EXTENDED STORAGE FUSE SWITCH (IF EQUIPPED)

The following switch may be mounted on the fuse block (Junction Box) for transportation and storage.

Extended storage fuse switch
Type A Type B Type C

Remove the extended storage fuse switch if it causes the interference when checking fuses.

How To Extended Storage Fuse Switch ON/OFF

CAUTION:

  • Turn the ignition switch OFF when operating the extended storage fuse switch.

  • Under normal conditions, keep the extended storage fuse switch in ON state. Never operate the extended storage fuse switch except when necessary.

  • Type A

    • To turn the extended storage fuse switch OFF, pull it up in direction as shown in the figure.

    • To turn the extended storage fuse switch ON, press it in direction as shown in the figure.

  • Type B

    • To turn the extended storage fuse switch OFF, hold of the switch and pull up in direction as shown in the figure.

    • To turn the extended storage fuse switch ON, press it in direction as shown in the figure.

  • Type C

    • To turn the extended storage fuse switch OFF, pull it up in direction as shown in the figure.

    • To turn the extended storage fuse switch ON, press it in direction as shown in the figure.

How To Remove Extended Storage Fuse Switch

Type A

  1. Turn the ignition switch OFF.

  2. Turn the extended storage fuse switch OFF.

  3. Press pawl and tilt to disengage the extended storage fuse switch. Press pawl and tilt to remove the extended storage fuse switch.

    CAUTION:

    Never use fuse for bus bar.

    NOTE:

    • Extended storage fuse switch and bus bar are removed together. Remove bus bar from extended storage fuse switch, if necessary.

    • Install removed bus bar to fuse block.

    • Extended storage fuse switch is for transportation and storage. Reinstallation is not required after the removal.

Type B

  1. Turn the ignition switch OFF.

  2. Turn the extended storage fuse switch OFF.

  3. Hold and pull up the extended storage fuse switch hard in direction.

    CAUTION:

    Never use fuse for bus bar.

    NOTE:

    • Extended storage fuse switch and bus bar may be removed together. Remove bus bar from extended storage fuse switch, if necessary.

    • Install removed bus bar to fuse block.

    • Extended storage fuse switch is for transportation and storage. Reinstallation is not required after the removal.

Type C

  1. Turn the ignition switch OFF.

  2. Turn the extended storage fuse switch OFF.

  3. Hold and pull up the extended storage fuse switch hard in direction.

    CAUTION:

    Never use fuse for bus bar.

    NOTE:

    • Extended storage fuse switch and bus bar are removed together. Remove bus bar from extended storage fuse switch, if necessary.

    • Install removed bus bar to fuse block.

    • Extended storage fuse switch is for transportation and storage. Reinstallation is not required after the removal.

    Other materials

    Vehicle load capacity
    Basic information Before operating a loaded Nissan Armada, always verify that the total vehicle weight does not exceed the specified Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). These critical limits are clearly indicated on the F.M.V.S.S./C.M.V.S.S. certificatio ...

    Noise, Vibration and Harshness (nvh) Troubleshooting
    NVH Troubleshooting Chart Use chart below to find the cause of the symptom. If necessary, repair or replace these parts. Possible cause and SUSPECTED PARTS Symptom Reference DRIVE SHAFT FRONT AXLE Noise Shake Noise Shake Vibration Shimmy Judder Poor quality ride or handling Excessive ...

    Anti-Pinch Inspection
    Description Check anti-pinch function when the initialization of moonroof and sunshade system is performed. Refer to Work Procedure. Work Procedure CHECK ANTI-PINCH FUNCTION Fully open the moonroof. Place a piece of wood near the fully closed position. Close the moonroof completely with auto c ...