How To Check
With ProPILOT ASSIST 2.1
A melted fusible link can be detected by visual inspection. If its condition is questionable, use circuit tester or test lamp.
 |
Fusible link |
CAUTION:
-
If fusible link should melt, it is possible that critical circuit (power supply or large current carrying circuit) is shorted. In such a case, carefully check and eliminate cause of malfunction.
-
Never wrap outside of fusible link with vinyl tape. Important: Never let fusible link touch any other wiring harness, vinyl or rubber parts.
Without ProPILOT ASSIST 2.1
A melted fusible link can be detected either by visual inspection or by feeling with finger tip. If its condition is questionable, use circuit tester or test lamp.
|
Fusible link |
CAUTION:
-
If fusible link should melt, it is possible that critical circuit (power supply or large current carrying circuit) is shorted. In such a case, carefully check and eliminate cause of malfunction.
-
Never wrap outside of fusible link with vinyl tape. Important: Never let fusible link touch any other wiring harness, vinyl or rubber parts.
Other materials
Sub-Tcm
Exploded View
Bracket
Sub-TCM
: N·m (kg-m, in-lb)
: vehicle front
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Re ...
Transfer Control Unit
Exploded View
Transfer control unit
: N·m (kg-m, in-lb)
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking an ...
Fuel Filler Lid
Removal and Installation
REMOVAL Fully open fuel filler base assembly.
Disengage fuel filler lid fixing pawl using a removal tool (A), and then remove fuel filler lid according to numerical order 1→2 indicated by arrows as shown in figure.
: Pawl
INSTALLATION Note the following items, and ...