Exploded View

![]() |
Glove box assembly | ![]() |
Sleeve | ![]() |
Glove box lid lock cylinder |
Removal and Installation
REMOVAL
NOTE:
Glove box lid lock key cylinder is integrated with glove box assembly. So, glove box lid lock key cylinder cannot be removed from glove box assembly and it cannot be replaced without glove box assembly.
Remove glove box lid assembly. Refer to Removal and Installation.
INSTALLATION
CAUTION:
Never pull out glove box lid lock cylinder
from sleeve
. Otherwise, tumbler
pops out glove box lid lock key cylinder.

-
Align groove
of sleeve
with projection
of insert hole of glove box latch handle
of glove box assembly.
-
Push to install glove box lid lock key cylinder
for glove box latch handle
of glove box assembly until locked tumble stopper
.
-
Install glove box assembly. Refer to Removal and Installation.
CAUTION:
After installation, check glove box assembly open/close, lock/unlock operation.
Other materials
Front Door Check Link
Removal and Installation
REMOVALFully close front door glass.
Remove front door woofer. Refer to Removal & Installation.
Remove front door check link mounting bolt of vehicle body side.
Remove front door check link mounting bolts of front door panel, and then take front door check link out from ...
Washer Level Switch
Exploded View
Washer tank
Packing
Washer level switch
Removal and Installation
WARNING:
REMOVALCAUTION:
When washer level switch is removed, washer fluid may come out so prepare a container to receive washer fluid and never allow washer fluid to be sprinkled.Remove fender protector RH. R ...
Diagnosis and Repair Workflow
Work flow
OVERALL SEQUENCE
Reference 1···On Board Diagnosis Function.
Reference 2···DTC Index.
Reference 3···Component Function Check.
Reference 4···Diagnosis Procedure.
DETAILED FLOWOBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain as much information as possible ...
