Removal and Installation
REMOVAL
Remove rear bumper fascia. Refer to Removal and Installation.
Remove bracket cover fixing screws, and then remove bracket cover.
Disconnect hands free sensor harness connectors.
Remove hands free control unit fixing screws, and then remove hands free control unit.
Remove hands free sensor upper and lower from hands free sensor bracket.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
After installation, check door lock. Refer to Inspection.
-
Never confuse hands free sensor upper (white harness) and hands free sensor lower (yellow harness).
-
After installation, check that automatic back door system by hands free function is activated in the detection area (with hands free sensor models). Refer to System Description.
Other materials
Consult/gst Checking System
Description
When CONSULT/GST is connected with a data link connector (A) equipped on the vehicle side, it will communicate with the control unit equipped in the vehicle and then enable various kinds of diagnostic tests.
1
: Instrument lower panel LH
Refer to “CONSULT Software Operation ...
Road Wheels & Tires Tools and Preparation
Special Service Tool
The actual shapes of TechMate tools may differ from those of special service tools illustrated here.
Tool number
(TechMate No.)
Tool name Description
—
(J-50190)
Signal tech II
Activate and display TPMS tire pressure sensor IDs
Display tire pressure reported by th ...
Diagnosis and Repair Work Flow
Work Flow
OVERALL SEQUENCEDETAILED FLOWGET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurs).
Check operation condition of the function that is malfunctioning.
>>
GO TO 2.
CHECK ...