INSPECTION AFTER INSTALLATION
Check the brake hoses and tubes for the following: no scratches; no twist and deformation; no looseness at connections.
CAUTION:
Clearance with brake hose and each parts being secured more than 10 mm (0.39 in) in unladen condition*.
*: Fuel, engine coolant and lubricant are quantity to specified. Spare tire, jack, hand tools and mats are brought out of vehicle.
CAUTION:
Removal and InstallationExploded View
STEERING SHAFT
Steering shaft Lower joint Hole cover* Clamp* Hole cover seal Collar Upper joint *: Replace and as a set. : Always replace after every disassembly. : N·m (kg-m, ft-lb) : N·m (kg-m, in-lb) ...
Normal Operating Condition
Symptom Result Brake pedal slightly vibrates and operation sound (motor sound and sound from suspension) occurs when VDC function, TCS function, ABS function, EBD function, brake limited slip differential (BLSD) function, brake assist function, hill start assist function, or advanced hill descent ...
Removal and Installation
WARNING:
REMOVAL
Remove drive belt. Refer to Removal & Installation.
Keep drive belt auto-tensioner pulley arm locked after drive belt is removed.
Remove drive belt auto-tensioner and idler pulley.
Keep drive belt auto-tensioner pulley arm locked to install or remove drive belt auto-tensioner ...