Nissan Armada 2025-2026 Service and Repair Manual: Inspection Procedure
CHECK 12V BATTERY TERMINALS CONNECTION
Check if 12V battery terminals are clean and tight.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair 12V battery terminals connection.
CHECK “B” TERMINAL CONNECTION
Check if “B” terminal (alternator ground harness) is clean and tight.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair “B” terminal connection.
CHECK 12V BATTERY STATUS
Check 12V battery status. Refer to Work Flow.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Replace 12V battery. Refer to Removal and Installation.
CHECK DRIVE BELT TENSION
Check drive belt tension. Refer to Inspection.
Is the inspection result normal?
YES>>INSPECTION END
NO>>Repair as needed.
Other materials:
Determining Various Conditions of the Collision
Size, shape, position, rigidity, etc. of the other vehicle involved in the collision
Speed of both vehicles at the time of collision
Collision angle and direction
Number of occupants and their positions at the time of collision
Size, shape, hardness, etc. of load in the vehicle
History of damaged po ...
Diagnosis Procedure
CHECK STEERING TELESCOPIC MECHANISM
Check for the following.
Mechanism deformation or pinched foreign materials.
Interference with other parts because of poor installation.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK TELESCOPI ...
Work Procedure
Work Procedure (Before Replacing ECM)
NOTE:
After replacing with a blank ECM, programming is required to write ECM information. Be sure tofollow the procedure to perform the programming. According to the procedure of “Programming” in CONSULT Operation Manual.
SAVE ECM DATA
With CONSULT
Ignition ...
0.0051