Inspection Procedure
Charging SystemWork Procedure
Always perform the front camera unit configuration after replacing the front camera unit.
Always perform the camera aiming after removing and installing or replacing the front camera unit.
CAUTION:
The system does not operate normally unless the front camera unit configuration and the camera aiming ...
Removal and Installation
REMOVAL
CAUTION:
Never damage the front door panel.
Fully open front door glass.
Remove door mirror assembly. Refer to Removal and Installation.
Apply protective tape (A) on the part to protect it from damage.
Disengage front door outside molding fixing pawl using remover tool (A) and (B).
CAUTI ...
Removal and Installation
WARNING:
REMOVAL
Drain transfer fluid. Refer to Draining.
Remove transfer assembly from vehicle. Refer to Removal and Installation.
Remove the rear case mounting bolts .
* : Tighten together with the bracket.
Remove the rear case .
Remove the rear output shaft snap ring .
Remove the spr ...