Exploded View
 |
Back door panel |  |
Intelligent rear view mirror camera |  |
Intelligent rear view mirror camera harness connector |
| : vehicle front | |||||
 |
: N·m (kg-m, in-lb) | ||||
Removal and Installation
REMOVAL
Remove back door inner finisher. Refer to Removal and Installation.
Disconnect intelligent rear view mirror camera harness connector 
.
Disengage intelligent rear view mirror camera mounting bolts , and then remove intelligent rear view mirror camera.
INSTALLATION
Install in the reverse order of removal.
Other materials
A/t Fluid Cooler
Cleaning
Whenever an A/T is replaced, the A/T fluid cooler mounted in the radiator must be inspected and cleaned.Metal debris and friction material, if present, can become trapped in the A/T fluid cooler. This debris can contaminate the newly serviced A/T or, in severe cases, can block or restrict t ...
Brake System Service Data and Specifications
General Specifications
BRAKE SYSTEMUnit: mm (in) Front brake
Cylinder bore diameter
50.8 × 2 (2.000 × 2)
Pad length × width × thickness
151.6 × 53.2 × 12.0 (5.97 × 2.094 × 0.47)
Rotor outer diameter × thickness
350.0 × 30.0 (13.78 × 1.18)
Rear brake
Cylinder bore diamet ...
Sensor Rotor
Front Sensor Rotor
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspensio ...