Exploded View
 |
Bracket LH |  |
Inverter unit |  |
Bracket RH |
 |
:N·m (kg-m, in-lb) | ||||
Removal and Installation
REMOVAL
Remove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect inverter unit harness connector.
Remove inverter unit mounting nuts.
Remove the bracket from the inverter unit if necessary.
INSTALLATION
Note the following, and install in the reverse order of removal.
To install mounting nuts of inverter unit, referring tightening to the specified torque to the numerical order shown in the figure.
| Specified torque | : 1 → 2 → 3 → 4 | ||||
| : vehicle front | |||||
Other materials
Brake Pedal
Inspection and Adjustment
INSPECTIONBrake Pedal HeightCheck the height (H1) between the floor panel and the brake pedal upper surface. H1
: Refer to Brake Pedal.
CAUTION:
Remove the front floor carpet.Stop Lamp SwitchCheck the clearance (A) among the brake pedal lever and the stop lamp switch ...
Drain Assembly
Exploded View
Refer to Exploded View.
Removal and Installation
REMOVALRemove glass lid. Refer to Removal and Installation.
Tilt glass lid down.
Remove fixing screws , and then remove drain assembly.
INSTALLATIONInstall in the reverse order of removal. ...
Diagnosis and Repair Work Flow
Work Flow
OVERALL SEQUENCEDETAILED FLOWINTERVIEW FOR MALFUNCTION
It is also important to clarify the customer concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.
NOTE:
The customers are not professionals. Never assume that ...