Wiring Diagram
Wiring DiagramWhen SRS is not activated in a collision
CAUTION:
WORK PROCEDURE
Check the SRS components using the table below.
Ensure entire SRS operates properly.
SRS INSPECTION (FOR FRONTAL COLLISION)
Part Inspection Driver air bag module If the driver air bag has not been activated:
Remove driver air bag module. Check harness cover and connectors ...
FUEL TANK : Removal & Installation
WARNING:
REMOVAL
WARNING:
Be sure to read “General Precautions” when working on the fuel system. Refer to GENERAL PRECAUTION : Precautions.
Perform steps 1 to 7 of “REMOVAL” in “ FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL PUMP ASSEMBLY” on main fuel level sensor unit. Refer to FUEL LEV ...
Removal and Installation
WARNING:
REMOVAL
Remove valve timing control covers (bank 1 and bank 2). Refer to Removal & Installation.
Remove electric intake valve timing control actuator (bank 1 and bank 2). Refer to Removal & Installation.
Remove crankshaft pulley. Refer to Removal & Installation.
Remove front cov ...