LIQUID GASKET APPLICATION PROCEDURE
Remove old liquid gasket adhering to the liquid gasket application surface and the mating surface.
Remove liquid gasket completely from the liquid gasket application surface, mounting bolts, and bolt holes.
Wipe the liquid gasket application surface and the mating surface with white gasoline (lighting and heating use) to remove adhering moisture, grease and foreign materials.
Apply liquid gasket to the liquid gasket application surface.
Use Genuine Liquid Gasket or equivalent.
Within five minutes of liquid gasket application, install the mating component.
If liquid gasket protrudes, wipe it off immediately.
Do not retighten mounting bolts or nuts after the installation.
After 30 minutes or more have passed from the installation, fill engine oil and engine coolant.
Precautions for Removing Battery Terminal
Precautions For Engine ServiceLubricating
HOOD Refer to Exploded View. HOOD LOCK Refer to Exploded View. FRONT DOOR Refer to Exploded View. FRONT DOOR LOCK Refer to Exploded View. REAR DOOR Refer to Exploded View. REAR DOOR LOCK Refer to Exploded View. BACK DOOR Refer to Exploded View. BACK DOOR LOCK Refer to Exploded View. ...
Removal and Installation
WARNING:
REMOVAL
Remove transfer assembly from vehicle. Refer to Removal and Installation.
Remove input oil seal.
CAUTION:
Never damage the front case and input shaft.
INSTALLATION
Note the following, and install in the reverse order of removal.
L : 1.5 – 2.5 mm (0.059 – 0.098 in)
CAUTION: ...
Basic information
WARNING
In the Nissan Armada, always keep the doors securely locked while driving.
Combined with proper seat belt use, this significantly enhances passenger safety
by reducing the risk of ejection during an accident and preventing unauthorized
access from outside.
Before opening any d ...