Removal and Installation
REMOVAL
CAUTION:
When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
Luggage Floor Rear Board
Remove luggage floor box. Refer to Removal and Installation.
Remove belt bracket mounting bolt
of luggage floor rear board, and then remove luggage floor rear board.

Luggage Floor Board RH
Fold down the third seat RH forward.
Remove rope hook.Disengage rope hook cover fixing pawls using a remover tool (A), and then open rope hook cover.

CAUTION:
Use a remover tool wrapped in protective tape (B) to prevent damage the parts.
![]() |
: Pawl |
| : vehicle front |
, and then remove rope hook.

| : vehicle front |
Disengage luggage floor board RH fixing pawls and clips using a remover tool (A), and then remove luggage floor board RH.

![]() |
: Clip |
![]() |
: Pawl |
Luggage Floor Board LH
Remove luggage floor board RH.
Fold down the third seat LH forward.
Remove rope hook.Disengage rope hook cover fixing pawls using a remover tool (A), and then open rope hook cover.

CAUTION:
Use a remover tool wrapped in protective tape (B) to prevent damage the parts.
![]() |
: Pawl |
| : vehicle front |
, and then remove rope hook.

| : vehicle front |
Disengage luggage floor board LH fixing pawls and clips using a remover tool (A), and then remove luggage floor board LH.

![]() |
: Clip |
![]() |
: Pawl |
Luggage Floor Bracket
Remove luggage floor board (LH and RH).
Remove luggage floor bracket mounting bolts
.

Remove rear outer side mounting nuts of third seat. Refer to Removal and Installation.
Remove luggage floor bracket.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
Visually check clips for deformation and damage during installation. Replace with new ones if necessary.
-
When installing luggage floor board, check that clips and pawls are securely fitted in luggage floor bracket holes and press them in.
Other materials
Engine Assembly
Exploded View
Engine mounting bracket (RH)
Engine mounting insulator (RH)
Stopper bracket (RH)
Engine mounting bracket (LH)
Engine mounting insulator (LH)
Stopper bracket (LH)
Engine mounting insulator (rear)
Comply with the assembly procedure wh ...
Easy Fill Tire Alert Does Not Activate
Description
The easy fill tire alert does not function while inflating a tire when the selectposition is in P-range with the ignition switch ON or with the engine started.NOTE:
After starting to inflate the tire, it takes a few seconds for the easy fill tire alert to function.
If there is no r ...
Rear Reflex Reflector
Exploded View
Rear bumper fascia assembly
Rear reflex reflector LH
Rear reflex reflector RH
: Pawl
: N·m (kg-m, in-lb)
Removal and Installation
REMOVALRemove rear bumper fascia assembly. Refer to Removal and Installation.
Remove rear reflex reflector fixing screws .
Disengage ...

