Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
REMOVAL
CAUTION:
When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
Disengage map lamp assembly fixing metal clips and pawls using a remover tool (A), and then pull out map lamp assembly from headlining assembly.
 |
: Pawl |
 |
: Metal clip |
Disconnect harness connectors, and then remove map lamp assembly.
INSTALLATION
Install in the reverse order of removal.
Replacement
CAUTION:
-
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
-
Replacement of a single part is not possible due to the integrated structure with map lamp assembly. When replacement, replace map lamp assembly as a single part. Refer to Removal and Installation.
Other materials
Precautions
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...
Door & Lock Tools and Preparation
Special Service Tools
The actual shapes of TechMate tools may differ from those of special service tools illustrated here.
Tool number
(TechMate No.)
Tool name Description
(NI-39570)
Chassis ear
Locates the noise
(NI-50397)
NISSAN Squeak and Rattle Kit
Repairs the cause of noise
C ...
Driving Video Recorder System System Symptoms
Symptom Table
Symptom Possible cause Inspection item/Work item
””is displayed
Front camera (driving video recorder) abnormality
Rear camera (driving video recorder) abnormality
Inside camera (driving video recorder) abnormality
Perform diagnosis procedure
”” is displayed ...