Removal and Installation
REMOVAL
Remove headlining assembly. Refer to Removal and Installation.
Disengage body harness fixing clips 
, and then remove body harness from map lamp bracket.
| : vehicle front |
Remove map lamp bracket.
- Without moonroof models
- Remove map lamp bracket fixing clips .
- Disengage fixing metal clips, and then remove map lamp bracket.
: Metal clip
- Remove map lamp bracket fixing clips
- With moonroof models
Disengage fixing metal clips and dual-lock fastener
according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove map lamp bracket.
: Metal clip
INSTALLATION
Install in the reverse order of removal.
Other materials
Basic information
WARNING
Never operate your Nissan Armada while the parking brake is engaged.
Driving with the parking brake applied can cause overheating, reduced braking
performance, and eventual brake failure, significantly increasing the risk of
an accident.
Do not release the parking brake of you ...
Basic information
WARNING
Failure to properly follow the usage guidelines and safety instructions for
the RCTA system in the Nissan Armada may result in serious injury or even death.
The Rear Cross Traffic Alert system in the Nissan Armada is designed
as a supplemental aid and does not replace attentive dri ...
Rack End Value Reset
Work Procedure
NOTE:
When steering column assembly and steering gear assembly are replaced, rack end value reset (steering wheel turning angle learning value reset) is performed.
When the toe-in is adjusted, back end value reset (steering wheel turning angle learning value reset) is performed.
...