Description
-
When the back door position is in the range of
[between "just before fully closed" 
and the position approximately less than 150 mm (5.91 in) from "just before fully closed" 
], the back door does not operate even if any of switches are operated. -
To operate the back door by switches, manually close the back door to "Fully closed"
position or manually open the back door approximately more than 150 mm (5.91 in) from the position of "Just before fully closed". And then operate any of switches.
Other materials
Back Door Assembly
Removal and Installation
CAUTION:
Perform work with 2 workers, because it is heavy weight.
Support back door with a proper material and use protective tape or shop cloth to protect back door and body from falling and damage when removing and installing back door assembly.
REMOVALRemove roof rea ...
Rear Side Spoiler
Exploded View
Rear side spoiler
Double-sided tape
[t: 2.5 mm (0.098 in)]
: Clip
: Always replace after every disassembly.
Removal and Installation
REMOVALFully open back door.
Remove rear combination lamp cover. Refer to Removal and Installation.
Remove rear side spoile ...
Diagnosis and Repair Work Flow
Work Flow
OVERALL SEQUENCE
Reference 1··· CONSULT Function.
Reference 2··· DTC Index (6 Speaker Models).
Reference 3··· Symptom Table.
DETAILED FLOWINTERVIEW AND SYMPTOM CONFIRMATION
Check the malfunction symptoms by performing the following items.
Interview the customer to obtain ...