Diagnosis Procedure
REPLACE BCM
-
Replace BCM. Refer to Removal and Installation.
-
Confirm the operation after replacement.
Is the result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Other materials
Accelerator Control System
Exploded View
Accelerator pedal assembly
Accelerator pedal bracket
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)
Removal and Installation
REMOVALCAUTION:
Never disassemble accelerator pedal assembly.
Never remove ...
Precautions
PRECAUTIONS FOR SUPPLEMENTAL RESTRAINT SYSTEM (SRS) AIR BAG AND SEAT BELT PRE-TENSIONER : Precautions
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front p ...
Fusible Link Inspection
How To Check
With ProPILOT ASSIST 2.1A melted fusible link can be detected by visual inspection. If its condition is questionable, use circuit tester or test lamp.
Fusible link
CAUTION:
If fusible link should melt, it is possible that critical circuit (power supply ...