NVH Troubleshooting ChartWork Procedure
Perform the following procedures after replacing the sonar control unit.
REPLACE SONAR CONTROL UNIT
Replace sonar control unit. Refer to SONAR CONTROL UNIT : Removal & Installation.
>>
GO TO 2.
PERFORM CONFIGURATION
With CONSULT
Perform "Replace ECU". Refer to Description.
>>
GO ...
Anti-corrosive Treatment
Anti-corrosive treatment may be performed on three different occasions (before welding, before painting, and after painting). This section explains anti-corrosive treatment for the latter two occasions.
(1) ANTI-CORROSIVE TREATMENT BEFORE PAINTING
Application of body sealer
Body sealer prevents wate ...
Multiport Fuel Injection System or Engine Control System
Before connecting or disconnecting any harness connector for the multiport fuel injection system or ECM:
Turn ignition switch to “OFF” position.
Disconnect negative battery terminal.
Otherwise, there may be damage to ECM.
Before disconnecting pressurized fuel line from fuel pump to injectors, b ...