
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the driver side door opened.
Get out of the vehicle and close the driver side door.
| BR08DE | : 4 minutes | R9N engine | : 12 minutes |
| BR10DE | : 12 minutes | V9X engine | : 4 minutes |
| D4D engine | : 20 minutes | YD25DDTi | : 2 minutes |
| HR09DET | : 12 minutes | YS23DDT | : 4 minutes |
| HR10DDT | : 12 minutes | YS23DDTT | : 4 minutes |
| HR10DET | : 12 minutes | ZD30DDTi | : 60 seconds |
| HR13DDT | : 12 minutes | ZD30DDTT | : 60 seconds |
| HRA2DDT | : 12 minutes | ||
| K9K engine | : 4 minutes | ||
| M9R engine | : 4 minutes | ||
| R9M engine | : 4 minutes |
CAUTION:
Remove 12V battery terminal.
CAUTION:
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"REAR VIEW CAMERA : Adjustment
With 6 Speaker Models
Adjust the guide line position if the guide line position is shifted after installing the rear view camera.
Draw lines on rearward area of the vehicle passing through the following points: 120 mm (4.72 in) from both sides of the vehicle, and 0.5 m (1.64 ft), 1.0 m (3.28 ft) fro ...
Brake Pedal
Unit: mm (in)
Item Standard Brake pedal height 157.9 – 167.9 (6.22 – 6.61) Depressed brake pedal height
[Depressing 490 N (50 kg, 110 lb) while engine ON] 145.0 (5.71) or more Clearance between stop lamp switch mounting bracket and the brake pedal lever 14.0 – 18.0 (0.55 – 0.71) Brak ...
Exploded View
Handle rod guide Spare wheel carrier assembly Spare tire and wheel assembly : Vehicle front : N·m (kg-m, ft-lb) ...