When installing rubber bushings, the final tightening must be carried out under unladen conditions with tires on ground. Spilled oil might shorten the life of rubber bushings. Be sure to wipe off any spilled oil.
Unladen conditions mean that fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
After servicing suspension parts, be sure to check wheel alignment.
Self-lock nuts are not reusable. Always use new ones when installing. Since new self-lock nuts are pre-oiled, tighten as they are.
Precaution for Electronic Air Suspension System
Precaution for when Jacking and Lifting Up the Vehicle with Electronic Air Suspension
SystemRemoval and Installation
WARNING:
REMOVAL
CAUTION:
When washer tank assembly is removed, washer fluid may come out so prepare a container to receive washer fluid and never allow washer fluid to be sprinkled.
Fully open hood assembly.
Remove washer tank inlet fixing clip , and then remove washer tank inlet and washer tank ca ...
Diagnosis Procedure
CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE
Check Intelligent Key system symptom table.
Refer to Diagnosis Procedure.
>>
GO TO 2.
REGISTER INTELLIGENT KEY
Register the Intelligent Key again.
Check operation after replacement.
Is the inspection result normal?
YES>>
INSPECTION END
NO> ...
Safety note
WARNING
Never disassemble or modify the Nissan Armada system components. Doing
so may result in malfunction, fire, electric shock, or serious injury.
If the Nissan Armada system shows abnormal behavior, such as freezing,
loss of sound, or delayed response, discontinue use immediately.
...