Service Notice or Precautions for Rear Final Drive
Special Service ToolsInspection and Repair
INSPECTION
When measuring voltage, wrap tin foil around the top of the negative probe. Then press the foil against the wire with your finger.
Attach probe circuit tester (in Volt range) to middle portion of each filament.
If a filament is burned out, circuit tester registers 0 or battery voltage ...
Diagnosis Procedure
CAUTION:
VDC function, ABS function and EBD function never operate when the vehicle speed is 10 km/h (6.2 MPH) or less.
CHECK WARNING LAMP
Check that ABS warning lamp and VDC warning lamp turn ON and turn OFF several seconds after ignition switch is ON or driving.
Check that brake warning lamp turn ...
Removal and Installation
WARNING:
REMOVAL
Turn the ignition switch ON.
CAUTION:
Never start the engine.
Release the parking brake.
CAUTION:
If the brake cannot be released, release it manually. Refer to Diagnosis Procedure.
Turn the ignition switch OFF.
Disconnect 12V battery negative terminal. Refer to Removal and Instal ...