Nissan Armada 2025-2026 Service and Repair Manual: Service Notice or Precautions for Rear Final Drive
Use recommended gear oil only. Refer to Fluids and Lubricants.
Clean and flush the parts sufficiently and blow-dry them.
Be careful not to damage sliding surfaces and mating surfaces.
Always use shop paper for cleaning the inside of components.
Never use cotton gloves or shop rags to prevent entering of lint.
Precaution for Electronic Air Suspension System
WARNING:
CAUTION:
Never expand and contract the air spring of shock absorber.
Never expand and contract the air spring.
Never let foreign materials entered into parts.
Always check for the air leakage ...
Preparation
...
Other materials:
Adjustment
WARNING:
Recommended fluid and fluid capacity : Refer to Fluids and Lubricants.
CAUTION:
Use only recommended A/T fluid. Never mix with other A/T fluid.
Always maintain the A/T fluid temperature within between 45°C (113°F) and 55°C (131°F) while checking with CONSULT when the A/T fluid level ...
Removal and Installation
REMOVAL
Remove fuel filler base assembly. Refer to Removal and Installation.
Rotate and disengage fuel filler lid lock assembly fixing pawls according to the numerical order 1→2 indicated by arrows as shown in the figure, and then remove fuel filler lid lock assembly.
: Pawl : Vehicle front ...
LIQUID GASKET
REMOVAL OF LIQUID GASKET SEALING
After removing mounting nuts and bolts, separate the mating surface using the seal cutter [SST: KV10111100 (NI-37228)] (A) and remove old liquid gasket sealing.
CAUTION:
Never damage the mating surfaces.
Tap the seal cutter [SST: KV10111100 (NI-37228)] to insert it ...
0.0065