InspectionRemoval and Installation
REMOVAL
Remove rear door assembly. Refer to Removal and Installation.
Remove rear door hinge mounting bolts, and then remove rear door hinge from vehicle body.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
Before installation, check the rear door h ...
Symptom Table
WARNING:
Perform self-diagnosis using CONSULT before the symptom diagnosis. Perform trouble diagnosis if any DTC is detected. Refer to DTC Index.
SymptomPossible causeHow to solveVehicle height is not risen/fallenEngine is stoppedStart the engine.Each switch is OFFCheck the staus of the switch.Elect ...
Inspection
WARNING:
MOUNTING INSPECTION
Check the mounting conditions (looseness, back lash) of each component and component conditions (wear, damage) are normal.
WHEEL BEARING INSPECTION
Move wheel hub and bearing assembly in the axial direction by hand. Check there is no looseness of wheel hub and bearing as ...