Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"Condition of the Panel
Before beginning, thoroughly check the panel and make any necessary corrections.
(1) CLEARANCE BETWEEN WELDING SURFACES
Gaps between the surfaces to be welded cause poor current flow. Even if welding could be done without removing such gaps, the welded area would be smaller, resulting in poor streng ...
Service
Disconnect battery negative terminal in advance.
Disconnect air bag system line in advance.
Never tamper with or force air bag lid open, as this may adversely affect air bag performance.
Be careful not to scratch pad and other parts.
When removing parts, use remover tool that is made of plastic.
Whe ...
Exploded View
ABS actuator and electric unit (control unit) Bracket ABS actuator and electric unit (control unit) harness connector To electrical brake control unit primary side To electrical brake control unit secondary side To front RH caliper To front LH caliper To rear RH caliper To rear LH caliper ...