WARNING:
REMOVAL
Remove air breather hose A
from transfer assembly.

Remove clip A
.

Remove clip B
.

Remove A/T air breather hose. Refer to Removal and Installation.
Release clip C
and remove air breather hose assembly
from bracket.

Separate each component part.
INSTALLATION
Note the following, and install in the reverse order of removal.
For non-reusable parts, refer to Exploded View.

![]() | : Vehicle front |
Install air breather hose A with the paint mark
facing leftward.

![]() | : Vehicle front |

CAUTION:
Exploded ViewDiagnosis Procedure
CHECK GLASS LID
Check the following items.
Cracks, damage, or deformation of weather-strip.
Sticking of weather-strip.
Loose or missing glass lid mounting bolt.
Misalignment of glass lid. Refer to Adjustment.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the m ...
Removal and Installation
REMOVAL
Remove rear door assembly. Refer to Removal and Installation.
Remove rear door hinge mounting bolts, and then remove rear door hinge from vehicle body.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
Before installation, check the rear door h ...
Adjustment
TOTAL PRELOAD TORQUE
Remove side shaft. Refer to Disassembly and Assembly.
Rotate drive pinion back and forth 2 to 3 times to check for unusual noise and rotation malfunction.
Rotate drive pinion at least 20 times to check for smooth operation of the bearing.
Measure total preload with the preload g ...