For removal and installation procedure of seat belt pre-tensioner, refer to the following.
Front: Refer to Removal & Installation.
Second: Refer to Removal & Installation.
Exploded View
Lap PretensionerRemoval and Installation
REMOVAL
Remove combination meter. Refer to Removal and Installation.
Remove mounting screw , and remove bracket .
Remove mounting nuts , and remove ADAS control unit 2 from steering member .
Disconnect ADAS control unit 2 connector.
Remove mounting nuts , and remove ADAS control unit 2 from br ...
Additional Service When Replacing Around View Monitor Control Unit
CAUTION:
When replacing the around view monitor control unit, always replace it with a new one. Around view monitor system does not operate properly in case of reuse of the around view monitor control unit from another vehicle.
When before writing the around view monitor control unit configuration, ...
Disposal
Fix the electrical brake control unit to a vise.
CAUTION:
Always set copper plates or cloth between vise grips when fixing the electrical brake control unit to a vise.
Never overtighten the vise.
Make a slit in the area (A) with a saw to release filler gas.
A : 50 mm (1.97 in)
CAUTION:
Wear ...