REMOVAL
Remove instrument panel assembly. Refer to Removal and Installation.
Remove fixing screw
and disengage fixing pawl
, and then remove center ventilator duct.

INSTALLATION
Install in the reverse order of removal.
Work Flow
CUSTOMER INTERVIEW
Squeak – (Like tennis shoes on a clean floor)
Squeak characteristics include the light contact/fast movement/brought on by road conditions/hard surfaces = high-pitched noise/softer surfaces = low-pitched noises/edge to surface = chirping.
Creak – (Like walking on an old woode ...
Precautions for Suspension
When installing rubber bushings, the final tightening must be carried out under unladen conditions with tires on ground. Spilled oil might shorten the life of rubber bushings. Be sure to wipe off any spilled oil.
Unladen conditions mean that fuel, engine coolant and lubricant are full. Spare tire, j ...
Disassembly and Assembly
DISASSEMBLY
Disengage the pawl and turn EVAP canister vent control valve counterclockwise.
: Lock : Unlock
Remove the EVAP canister vent control valve.
ASSEMBLY
Assemble in the reverse order of disassembly.
CAUTION:
Do not reuse O-rings. ...