REMOVAL
Remove outside seat cushion finisher outer. Refer to Disassembly and Assembly.
Disengage massage switch harness fixing clip.

![]() | : Clip |
Remove fixing screws
and then remove massage switch.

INSTALLATION
Install in the reverse order of removal.
Massage Switch
Folding SwitchWork Flow
Without ProPILOT Assist 2.1
OVERALL SEQUENCE
DETAILED FLOW
INTERVIEW FOR MALFUNCTION
It is important to clarify the customer’s concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.
NOTE:
The customers are not professionals ...
Removal and Installation
WARNING:
Always observe the following items for preventing accidental activation.
Before servicing, ignition switch OFF, disconnect 12V battery negative terminal and wait for 3 minutes or more (discharges electricity held in the additional power supply circuit of the air bag diagnosis sensor unit). ...
Precautions for removing battery terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...