Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
REMOVAL
Remove front door finisher. Refer to Removal and Installation.
Disengage the fixing pawls using a remover tool (A) and then remove seat memory switch.
 | : Pawl |
INSTALLATION
Install in the reverse order of removal.
Other materials:
STEERING ASSIST SWITCH : Removal & Installation
REMOVAL
Remove instrument pad A.Refer to Removal and Installation.
Remove mounting screws , and remove switch panel from instrument pad A .
Unhook the pawls to remove the switch from the switch panel .　
INSTALLATION
Installation is in the reverse order of removal. ...
Removal and Installation
WARNING:
REMOVAL
CAUTION:
When washer pump is removed, washer fluid may come out so prepare a container to receive washer fluid and never allow washer fluid to be sprinkled.
Remove fender protector RH. Refer to Removal and Installation.
Disconnect front washer tube A from washer pump, washer pump t ...
Zero Point Reset
Zero point reset is an initializing procedure for occupant detection system that must be performed when replacing occupant detection system control unit or removing and installing passenger seat.
If zero point reset is not performed, the initialization is incomplete and occupant detection system doe ...
0.0071