REMOVAL
Remove steering column cover lower. Refer to Removal and Installation.
Disengage the fixing pawls using a remover tool (A) and then remove tilt & telescopic switch.

![]() | : Pawl |
INSTALLATION
Install in the reverse order of removal.
Removal and Installation
REMOVAL
CAUTION:
Before removing moonroof motor, check that glass lid is fully closed.
After removing moonroof motor, never attempt to rotate moonroof motor assembly as a single unit.
Remove headlining to make work space. Refer to Removal and Installation.
Disconnect harness connector, and then di ...
Diagnosis Procedure
NOTE:
Check that refrigerant is enclosed in cooler cycle normally. If refrigerant amount is shortage from proper amount, perform the inspection of refrigerant leakage.
CHECK MAGNET CLUTCH OPERATION
Check magnet clutch. Refer to Diagnosis Procedure.
Does it operate normally?
YES>>
GO TO 2.
NO ...
Inspection
INSPECTION AFTER INSTALLATION
INSPECTION AFTER INSTALLATION
The following are procedures for checking fluid leakage, lubricant leakage.
Before starting engine, check oil/fluid levels including engine coolant and engine oil. If any are less than the required quantity, fill them to the specified level ...