CAUTION:
Perform work with 2 workers, because it is heavy weight.
Support hood with a proper material and use protective tape or shop cloth to protect hood and body from falling and damage when removing and installing hood assembly.
REMOVAL
Support hood assembly with a proper material to prevent it from falling.
WARNING:
Injury may occur if hood assembly is not supported with a proper material when removing hood assembly.
Remove hood assembly mounting nuts, and then remove hood assembly.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
Before installation, apply anticorrosive agent onto mounting surface.
When installation, perform the fitting adjustment. Refer to Adjustment.
After installation, apply touch-up paint (the body color) if the paint around hinge is peeled off during removal.
After installation, check the open/close operation. Refer to Inspection.
Hood Assembly
InspectionExploded View
Rear door glass run Rear door panel Hole seal 1 Hole seal 2 Rear door glass Rear door lower sash upper Rear door lower sash lower Rear door inner frame rear Rear door inner frame front Rear door regulator assembly Rear door power window motor Rear door regulator : Clip : Always replac ...
Removal and Installation
WARNING:
REMOVAL
CAUTION:
Never depress the brake pedal while removing the brake hose or brake tube. If this is not complied with, brake fluid may splash.
Remove tires. Refer to ROAD WHEEL TIRE : Removal & Installation.
Perform the advance preparation "(Air release) Accumulator pressure release ...
Engine compartment check locations
Window washer fluid reservoir
Fuse/fusible link holder
Engine oil filler cap
Engine oil dipstick
Brake fluid reservoir
Battery
Engine coolant reservoir
Radiator filler cap
Drive belts
Air cleaner
VR35DDTT engine
NOTE:
Depending on the configuration of your Nissan Arma ...