REMOVAL
Remove TORX bolts, and then remove rear door striker.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
Never reuse TORX bolt. Always replace it with a new one when it is removed.
Before tighten rear door striker mounting TORX bolts to the specified torque, perform the fitting adjustment. Refer to Adjustment.
Rear Door HingeRemoval and Installation
REMOVAL
CAUTION:
Drain engine coolant from cooling system. Refer to ENGINE COOLANT : Draining.
Disconnect front heater pipe assembly from front heater core. Refer to Removal and Installation.
Disconnect low-pressure pipe from front expansion valve. Refer to Removal and Installation.
Disconnect high- ...
Removal and Installation
REMOVAL
Captain Seat
Remove inside seat cushion finisher outer. Refer to Disassembly and Assembly.
Disconnect seat belt buckle harness connector and disengage harness clips.
Remove seat belt buckle mounting anchor bolt, and then remove seat belt buckle.
Bench Seat
Remove the following part.
Seat cu ...
System maintenance (ProPILOT Assist 2.1)
For reliable and accurate operation of the Nissan Armada ProPILOT Assist 2.1
system, it is crucial to keep the driver monitoring area clean and free from any
obstruction at all times.
Regularly inspect the camera surface and gently remove dust, fingerprints, or
any debris using a soft, cl ...