Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
REMOVAL
Remove front grille upper. Refer to Removal and Installation (OFF ROAD MODELS) or Removal and Installation (CITY MODELS).
Disconnect hood lock switch harness connector (if equipped).
Remove hood lock assembly mounting bolts, and then remove hood lock assembly.
CAUTION:
Never bend hood lock control cable assembly strongly.
Disconnect hood lock control cable assembly from hood lock according to the numerical order 1→2 indicated by arrows as shown in figure.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
Check that hood lock control cable assembly is properly engaged with hood lock assembly.
When installation, perform hood fitting adjustment. Refer to Adjustment.
After installation, perform hood lock control inspection. Refer to Inspection.
Inspection
NOTE:
If the hood lock control cable assembly is bent or deformed, replace it.
Check that secondary latch is securely engaged with bracket from dead load of hood assembly.
Check that primary latch is ...
Other materials:
Work Procedure
Always perform the side radar alignment after performing the following work.
After removing and installing or replacing the side radar.
After removing and installing, replacing or repainting the rear bumper.
Side radar alignment conditions are following;
The vehicle speed is 20 km/h (13 MPH) or hig ...
Drying the Body Filler
When the hardener is mixed with the base, the filler begins to harden. Heat is also generated, which accelerates hardening. For this reason, filler drying speed varies with maximum thickness allowed..
If a thick coat of filler is applied, the generated heat remains inside, hence it hardens quickly. ...
2nd row seats
Basic information
The second row seating system in the Nissan Armada is designed to provide a balance
of comfort, flexibility, and safety for passengers. Proper operation and positioning
of the 2nd row seats in the Nissan Armada are essential for ensuring maximum occupant
protection and maint ...
0.008