CAUTION:
Never bend the pawl of power window switch finisher.
REMOVAL
Remove front door finisher (passenger side). Refer to Removal & Installation.
Disengage door lock and unlock switch (passenger side) fixing pawls using a remover tool (A), and then remove door lock and unlock switch (passenger side)
from the power window switch finisher (passenger side).
![]() | : Pawl |

INSTALLATION
Installation is in the reverse order of removal.
Passenger SideWork Procedure
STEP 1
Fully close the back door manually.
>>
GO TO 2.
STEP 2
Operate back door opener switch and perform automatic back door open operation.
>>
GO TO 3.
STEP 3
The back door fully opens.
Check that automatic back door warning buzzer sounds normally.
Does automatic back door warning ...
Refilling
WARNING:
IN CASE REPLACING OR REMOVING AND INSTALLING ELECTRICAL BRAKE CONTROL UNIT
Regarding brake fluid draining, refer to Work Procedure.
IN CASE NOT REPLACING OR REMOVING AND INSTALLING ELECTRICAL BRAKE CONTROL UNIT
CAUTION:
Check that there is no foreign material in the reservoir tank, and refi ...
Work Flow
OVERALL SEQUENCE
*1: Include 1st trip DTC. *2: Include 1st trip freeze frame data.
DETAILED FLOW
GET INFORMATION FOR SYMPTOM
Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the “Diagnostic Work Sh ...