Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure

Nissan Armada 2025-2026 Service and Repair Manual / Body Exterior, Doors, Roof & Vehicle Security / Door & Lock — Basic Inspection / Additional Service When Replacing Automatic Back Door Control Unit / Work Procedure

STEP 1

Fully close the back door manually.

GO TO 2.

STEP 2

Operate back door opener switch and perform automatic back door open operation.

GO TO 3.

STEP 3

The back door fully opens.
Check that automatic back door warning buzzer sounds normally.

Does automatic back door warning buzzer sound normally?

YES>>

GO TO 4.

NO>>

GO TO 1.

STEP 4

Fully close the back door.

WORK END

Additional Service When Replacing Automatic Back Door Control Unit

When replacing automatic back door control unit necessary to perform initial setting to operate automatic back door system normally. Refer to Work Procedure. ...

Configration (intelligent Key Unit)

Vehicle specification needs to be written with CONSULT because it is not written after replacing the Intelligent Key unit. The configuration requires network connection. CONSULT connects to network an ...

Other materials:

Precautions for Removing Battery Terminal
NOTE: NOTE: NOTE: The removal of 12V battery may cause a DTC detection error. HOW TO DISCONNECT 12V BATTERY TERMINAL Disconnect 12V battery terminal according to instruction described below. Open the hood. Turn ignition switch to the ON position. Turn ignition switch to the OFF position with the d ...

Grinding the Filled Area
Grind the filler when it is half-dried. Half-dried filler means the condition where the surface, if ground lightly with a surform, will produce continuous linear chips. Grinding with the surform will be difficult after the filler hardens completely. (1) ROUGH GRINDING BY SURFORM Smooth the filler su ...

0.0048